圖爾克一體式傳感器，F(xiàn)CI-D20A4P-AP8X-H1141
電話：O21-3952 9829/3O-8O1O
傳真：O21-6O83 1959
手機：189 1857 2467
Q：125 5O9 6653
聯系人：張海情
郵箱：8010@shqiantuo.com.cn
流量傳感器
一體式在線流量傳感器
液體監測流量傳感器
熱式功能原理
電位計調節
通過LED顯示流量狀態
工作范圍4 … 30 l/min
3線直流, 21…30 VDC
常開，pnp輸出
M12 x 1接插件
劑量率監測
許多液體配料應用程序與時間相關的。
FCI緊湊監控恒速流在配料過程，從而確保相同的流量。憑借其出色的響應時間，非常適合傳感器的應用比例間隔短。
潤干泵的保護
如果監視任務涉及檢測泵是否實際提供的介質，監測泵的進料壓力是不夠的。
FCI緊湊型監視實際流量與指示的流速的變化。因此，泵系統安全地運行干燥的保護。
修理或更換的成本和系統停機時間被淘汰。
灌裝系統流量監控
為了滿足苛刻的灌裝線的質量保證要求，必須保證它的劑量率在灌裝過程中始終是相同的。這是另一個因素，能夠可靠地監視FCI緊湊型。
如果FCI連接器與模擬輸出時，即使是輕微的偏差灌裝量可以被檢測出來。
冷卻回路的監測
工具和安裝組件的不斷流動的冷卻和潤滑劑的潤滑和冷卻的過程中進行監測，以避免系統損傷。
FCI緊湊立即注冊缺少流量和信號需要關機的機器和系統。
Dosage rate monitoring
Many liquid proportioning applications are timing dependent.
The FCI compact monitors the contstant flow during proportioning procedures and thus ensures identical flows. With its excellent response time, the sensor is perfectly suited to applications with short proportioning intervals.
Run-dry protection of pumps
If the monitoring task involves detection of whether the pump is actually delivering the medium, monitoring of the pump’s feed pressure is not sufficient.
The FCI compact monitors the actual flow rate and indicates a change in the flow speed. Pump systems are thus securely run-dry protected.
Repair or replacement costs and system down-times are eliminated.
Flow monitoring in filling systems
To meet the demanding requirements of quality assurance in filling lines, it must be assured that the dosage rate is always identical during the filling procedure. This is another factor that is reliably monitored by the FCI compact.
If an FCI with analogue output is used, even minor deviations of the filling volume can be detected.
Monitoring of cooling circuits
During lubrication and cooling of tools and installation components the constant flow of cooling and lubricating agents has to be monitored to avoid system damages.
The FCI compact immediately registers missing flows and signals the need to shut-down machines and systems.
